SharpShoot-R Precision Products - Slicker

Hightlights:DIRECTIONS: Spray a thin film on the surface to be lubricated or protected. To treat hard to reach areas, insert extension tube in spray tip. Material will start forming into grease in minutes. Allow 15 to 20 minutes for product to fully cure. Avoid over spray on painted or plastic surfaces to avoid damage. NOTE: Test before using on plastics or painted surfaces, as cracking or dissolving may result.

SUGGESTED USES:

• Internal firearms (bolts, actions, slides, & bore coating)
• External firearms (barrel, receiver, action, slide, & safety)
• Bicycle Chains, Motorcycle Chains, Chain Drives
• General Marine
• Fishing Reels
• Tools
• Tracks
• Machinery
• 4 Wheel Drive Vehicles
• Open Gears
• Cam & Slides
• Power Tools
• Metal Surfaces
• All-Terrain Vehicles (including 4 wheelers & 6 wheelers)
• SLICKERis an Excellent Release Agent for Fiberglass Bedding

SLICKER ™

ITS A GUNSMITH IN A CAN !

Most lubricants have a great deal of difficulty staying in place to complete the job of lubrication and protection.  This unique product sprays on and into hard-to-reach places.

Slicker ™ changes from a water-thin, penetrating synthetic fluid to become a tough, tack-free light lubricating grease.

Slicker ™ then creates a skin or film over the synthetic lubricant protecting it and metal parts from the incursion of dirt sand and grit.  This cured film is impervious to moisture, dust and dirt, and is stable at temperatures above 400 degrees Fahrenheit.  These properties make Slicker ™ an ideal lubricant for sportsmen.

Slicker ™ stays put and does the job that most thinner lubricants fail to do.  THERE IS NO OTHER PRODUCT AVAILABLE THAT WORKS IN THIS MANNER.

Slicker ™ can be used for both interior and exterior of your pistols, rifles, shotguns, and black powder firearms.

Internal application of Slicker ™ provides a light grease that won’t blow away but will continue to lubricate and stay put.

External application of Slicker ™ provides a tough coating of light grease that has a neutral di-electric constant, making it repel the attraction of dust and grit.

Slicker ™ also provides an excellent exterior protective long-term coating against rust and corrosion.